Skip to Content
  1. All Products
  2. All Products
  3. UMA Carburetor Temperature Probe 1/4-20 1B8 Non-TSO
Select currency EUR
UMA Carburetor Temperature Probe 1/4-20 1B8 Non-TSO

Image for illustration only. It may show a product series rather than the exact product offered.

UMA Carburetor Temperature Probe 1/4-20 1B8 Non-TSO

Factory-direct distributor Roctexo Aerospace is a factory-direct distributor for UMA, the manufacturer of this product. We welcome requests for any quantity of this product, as well as for other products manufactured by UMA.
https://www.roctexo.com/web/image/product.template/23150/image_1920?unique=8ef9bbe
Part numbers : RX1-10-01156 , 1B8 , 10-01156
Unit of Measure: EA

87.25 EUR / EA 87.25 EUR 87.25 € excl. VAT

87.25 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The UMA Instruments 1B8 is a non-TSO carburetor temperature probe intended for carburetor temperature sensing installations specified for this probe type. It uses a 5 kΩ thermistor sensing element and a 1/4-20 threaded mounting interface.

  • Manufacturer: UMA Instruments
  • Manufacturer part number: 1B8
  • Sensor type: 5 kΩ thermistor
  • Thread: 1/4-20
  • Probe tip length: approximately 6 mm
  • Lead wires: approximately 150 mm
  • Approval status: not EASA/FAA approved

Confirm the required probe part number, thread form, electrical characteristics and installation location against the applicable aircraft, engine and instrument documentation before installation.

Relevant documentation: UMA 1B Temperature Probe Installation Instructions.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.