Image for illustration only. It may show a product series rather than the exact product offered.
U Type Tinnerman A1787-8Z-1D
Part numbers
:
RX1-04-00365
, 54778-25
, 54778-5
, 04-00365
Unit of Measure:
EA
Orders with purchased items below
100.00 €
incur a small order fee of
10.00 €.
Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.
| Tinnerman No. | Screw Size | Part Number |
|---|---|---|
| A1787-8Z-1D | #8 | 04-00365 |
Overview
| Snaps over edge of panels or into center hole locations. Holds itself in place for blind assembly. "Floats" free for easy hole alignment. |
Specification Chart
Instructions
FLAT TYPE
- Fastener is positioned over screw clearance hole with screw-engaging prongs pointing up or outward. Screw is started into nut by hand from the underside.
- Screw can be power-driven into locked position (when base arch of fastener is flat) or a hand screw driver can be used. No wrench is required, finger pressure will prevent it from turning.
"U" TYPE
- Push into position with thumb until extrusion on lower leg snaps into screw hole. The fastener "floats" in screw-receiving position to correct for normal misalignment in panel mounting holes.
- Place second panel in position and drive screw. Access to opposite side is unnecessary. Flush mounting can be made by embossing either panel.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
These products might also be of interest
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.