Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

True Blue Power Dual USB Charging Port TA202 6430202-5

https://www.roctexo.com/web/image/product.template/13869/image_1920?unique=8ef9bbe
Part numbers : RX1-11-14433 , 6430202-5 , 11-14433
Unit of Measure: EA

357.19 EUR / EA 357.19 EUR 357.19 € excl. VAT

357.19 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
4 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The True Blue Power TA202, manufacturer part number 6430202-5, is a compact dual-port USB charging solution for aircraft electrical installations. This configuration provides two USB Type-A charging ports, a rear power-input connector and a non-illuminated face.

Designed for in-seat, cabin and cockpit installations, the TA202 accepts 10–32 VDC input and provides 5 VDC output at up to 3.0 A per port. Both ports can be used simultaneously, providing up to 15 W per port.

  • Manufacturer part number: 6430202-5
  • Model: TA202
  • Dual USB Type-A ports
  • Rear power-input connector
  • Non-illuminated configuration
  • Input: 10–32 VDC
  • Output: 5.0 VDC ±0.25 V; 3.0 A per port
  • Maximum input power: 18 W per port
  • Protection against short circuit, over-current and over-temperature conditions
  • Approximate dimensions: 38 × 26 × 32 mm
  • Weight: approximately 38 g
  • Mating connector kit P/N 9017960 included
  • FAA TSO-C71 qualification and RTCA DO-160G qualification stated in the manufacturer technical documentation

For installation and interface details, consult the applicable TA202 installation documentation and aircraft-approved data.

Manufacturer technical drawing for the TA202 series

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.