Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Trig TY 91 COMMWith 4Foot Harness To Audio Panel

https://www.roctexo.com/web/image/product.template/101093/image_1920?unique=8ef9bbe
Part numbers : RX1-11-12074 , ASA-00272-SU , 11-12074
Unit of Measure: EA

1944.48 EUR / EA 1944.48 EUR 1,944.48 € excl. VAT

1944.48 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Trig TY91 is a compact VHF communications radio designed to minimise panel-space requirements while providing modern 8.33 kHz and 25 kHz channel-spacing capability. This configuration is supplied with a 4 ft (approximately 1.2 m) harness for connection to an audio panel.

The TY91 uses a separate control head and radio unit, providing installation flexibility where available panel or equipment-bay space is limited. Its control head is only 74 mm deep, and the radio offers a nominal 6 W output across an 11–33 V supply range.

  • 8.33 kHz and 25 kHz channel spacing
  • Dual Watch function for monitoring two frequencies
  • Push Step tuning function for rapid frequency selection
  • Nine channel-memory positions
  • Integrated two-place intercom with auxiliary audio input
  • External-speaker amplifier
  • GPS and EFIS interfacing capability through supported standard protocols
  • EASA ETSO and FAA TSO approved TY91 radio platform

Part number: ASA-00272-SU

Installation must be carried out in accordance with the applicable aircraft approval basis and the current Trig installation documentation.

Documentation: Trig TY91/TY92 installation and operating manuals

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.