Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Trig TY 91 COMMWith 2 Place 4Foot Harness Jacks Attached

https://www.roctexo.com/web/image/product.template/126564/image_1920?unique=8ef9bbe
Part numbers : RX1-11-12073 , ASA-00271-SU , 11-12073
Unit of Measure: EA

2354.58 EUR / EA 2354.58 EUR 2,354.58 € excl. VAT

2354.58 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Trig TY91 is a compact, certified VHF communication radio designed to minimise panel-space requirements while providing 8.33 kHz and 25 kHz channel spacing. This configuration is supplied with a two-place harness of approximately 1.2 m (4 ft) and attached headset jacks, as identified for manufacturer part number ASA-00271-SU.

The TY91 uses a separate control head and radio unit, supporting flexible installation where available panel depth is limited. Its 6 W nominal transmitter output, Dual Watch function and Push Step frequency selection provide practical communication capability for suitably approved aircraft installations.

  • 8.33 kHz and 25 kHz channel spacing
  • Dual Watch monitoring of two frequencies
  • Push Step frequency-selection function
  • Built-in two-place intercom and external-speaker amplifier
  • 11–33 V DC supply range
  • Nominal transmitter power: 6 W
  • Control-head installation depth: 74 mm with connector fitted
  • ETSO-2C169a and ETSO-2C128 certification; TSO-C169a and TSO-C128a certification

Manufacturer part number: ASA-00271-SU.

Installation and operation should be carried out in accordance with the applicable Trig documentation and aircraft approval requirements.

Documentation: Trig TY91 installation and operating manuals.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.