Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Trig TT22 Transponder With 4Foot Wire Harness

https://www.roctexo.com/web/image/product.template/73892/image_1920?unique=8ef9bbe
Part numbers : RX1-11-12078 , ASA-00263-SU , 11-12078
Unit of Measure: EA

2805.71 EUR / EA 2805.71 EUR 2,805.71 € excl. VAT

2805.71 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Trig TT22 is a compact, remote-mount Class 1 Mode S transponder system for installations where instrument-panel space is limited. Its separate transponder unit and TC20 panel controller help minimise panel depth, while the controller incorporates an altitude encoder.

This configuration is supplied with a 1.2 m wire harness.

  • Manufacturer part number: ASA-00263-SU
  • Class 1 Mode S transponder
  • Nominal transmitter power: 250 W
  • Remote-mounted transponder unit with separate TC20 control head
  • Integrated altitude encoder in the control head
  • 1090ES ADS-B Out capable; functionality and compliance depend on the approved aircraft installation and associated equipment
  • Designed for 9–33 V DC aircraft electrical systems

Official Trig documentation identifies the TT22 as an ETSO-authorised product. The transponder article approval does not by itself constitute aircraft installation approval; installation must be assessed and approved as applicable to the aircraft and operating requirements.

Installation manuals, operating manuals and the TT22 ETSO certificate are available from Trig Avionics support documentation.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.