Skip to Content
  1. All Products
  2. All Products
  3. Trig TI106 Course Deviation Indicator CDI
Select currency EUR
Trig TI106 Course Deviation Indicator CDI

Image for illustration only. It may show a product series rather than the exact product offered.

Trig TI106 Course Deviation Indicator CDI

https://www.roctexo.com/web/image/product.template/3601/image_1920?unique=8ef9bbe
Part numbers : RX1-11-16843 , 01913-00 , 11-16843
Unit of Measure: EA

2895.67 EUR / EA 2895.67 EUR 2,895.67 € excl. VAT

2895.67 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
3 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Trig TI106 is a 76 mm Course Deviation Indicator (CDI) for panel-mounted navigation displays. Manufacturer part number: 01913-00.

The TI106 is designed to present VOR, GPS, localizer and glideslope information when connected to suitable navigation equipment. Solid-state actuators provide navigation indications, while LED lighting illuminates the dial, pointers and annunciators. Trig identifies the TI106 as ideally matched to its TX56 and TX57 Nav/Com units.

  • Course Deviation Indicator with 76 mm front-panel format
  • EASA ETSO C34e, C36e and 2C40c; FAA TSO-C34e, C36e and C40c
  • RTCA DO-160B/G environmental qualification
  • 12–32 VDC supply; typical current consumption 0.2 A
  • Operating temperature: −55 °C to +70 °C
  • Approximate dimensions: 83 × 83 × 121 mm
  • Weight: 0.59 kg

Please confirm interface requirements, installation configuration and applicable aircraft approval requirements before installation.

Documentation: Trig TI106 CDI Installation Manual (02179-00).

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.