Skip to Content
  1. All Products
  2. All Products
  3. Telex Airman 8 Ds ANR Headset Airbus
Select currency EUR
Telex Airman 8 Ds ANR Headset Airbus

Image for illustration only. It may show a product series rather than the exact product offered.

Telex Airman 8 Ds ANR Headset Airbus

https://www.roctexo.com/web/image/product.template/3578/image_1920?unique=8ef9bbe
Part numbers : RX1-11-15434 , AIRMAN8-0211 , 11-15434
Unit of Measure: EA

577.95 EUR / EA 577.95 EUR 577.95 € excl. VAT

577.95 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
1 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Telex Airman 8 is a lightweight, double-sided active noise reduction (ANR) aviation headset designed for clear cockpit communications. Manufacturer part number AIRMAN8-0211 is the 600 Ω version with a 5-pin male XLR connector.

The headset uses Telex’s battery-free ANR system, powered through the boom microphone connection. Its amplified electret, noise-cancelling microphone, stainless-steel headband, metal pivots, soft ear cushions and dual-direction ear-cup pivots support comfortable use during extended duty periods.

  • Manufacturer part number: AIRMAN8-0211
  • Configuration: double-sided ANR headset
  • Connector: 5-pin male XLR
  • Impedance: 600 Ω
  • Wearing weight: approximately 119 g
  • Cord length: approximately 1.8 m
  • Power: via boom microphone connection; no headset batteries required
  • FAA TSO-C139a approved

Please verify connector type, aircraft audio-system requirements and installation suitability before ordering.

Manufacturer documentation: Telex Airman 8 product information and Airman 8 operating instructions.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.