Lackfabrik Bäder Torque Sealant Standard Blue Tube 20 ml
Standard range
Our Schraubensicherungslack Standard (torque sealant) is the essential tool to protect, mark, fill and seal work involving all kinds of screw securing jobs.
Features
- Extremely good adhesion
- Fast drying
- Insulating
- Good media resistance
Colors
Container and suggested screw sizes
Flow properties
Flow
The paint system is relatively thin and has self-levelling flow properties
Standards
UV- and weather-resistant for min. 10 years*
*according to DIN EN ISO 2810
Industry specifications
Airbus Specification ECS‑L 2274
Boeing Specification BMS8 45 Type II
Rolls-Royce Specification MSRR1102
Bosch-Norm 2580–1
Safran Specification HMDC6002
Technical data
| Viscosity | 15.000 - 20.000 mPas |
| VOC value* | 540 g/L ±20 g/L |
| Application temperature | -20° C - 35° C |
| Temperature stability | -80° C - 160° C |
| pH value | - |
| Flashpoint | 29° C |
| Dust-dry after** | approx. 5 min |
| Fully hardened after** | approx. 24 hours |
| Density | ca. 1,05 g/cm3 |
| Shelf life | 6 - 48 months |
* May vary slightly depending on the respective colour. ** Drying and through-drying speed are strongly dependent on the layer thickness and the ambient conditions. Please test for your own application.
Media resistance
Compare our torque sealants
Technical data
| Standard range | Zero range | Fast Dry range | Heat range | Resist range | |
| Viscosity | 15.000 - 20.000 mPas | 10.000 - 30.000 mPas | 20.000 - 30.000 mPas | 15.000 - 20.000 mPas | 15.000 - 20.000 mPas |
| VOC value* | 540 g/L ±20 g/L | 0 g/L | 520 g/L ±20 g/L | 540 g/L ±20 g/L | 540 g/L ±20 g/L |
| Application temperature | -20° C - 35° C | 2° C - 35° C | -20° C - 35° C | 2° C - 35° C | -20° C - 35° C |
| Temperature stability | -80° C - 160° C | -80° C - 120° C | -80° C - 125° C | -80°C - 600°C | -80°C - 180°C |
| pH value | - | ca. 8 - 9 | - | 10 - 11 | 10 - 11 |
| Flashpoint | 29° C | - | -4° C | - | - |
| Dust-dry after** | approx. 5 min | approx. 10 min | approx. 1 min | ca. 10 - 15 min | ca. 5 - 10 min |
| Fully hardened after** | approx. 24 hours | approx. 12 hours | approx. 24 hours | approx. 24 hours | approx. 12 hours |
| Density | ca. 1,05 g/cm3 | ca. 0,98 g/cm3 | ca. 1,05 g/cm3 | ca. 1,00 g/cm3 | ca. 1,05 g/cm3 |
| Shelf life | 6 - 48 months | 6 - 24 Monate | 6 - 24 Monate | 12 Monate | 12 Monate |
* May vary slightly depending on the respective colour. ** Drying and through-drying speed are strongly dependent on the layer thickness and the ambient conditions. Please test for your own application.
Media resistances
These products might also be of interest