Skip to Content

Weyer Hotspray 10 V3 Heatable Spraying Unit 10 Liter

Factory-direct distributor Roctexo Aerospace is a factory-direct distributor for Weyer, the manufacturer of this product. We welcome requests for any quantity of this product, as well as for other products manufactured by Weyer.
https://www.roctexo.com/web/image/product.template/289691/image_1920?unique=d26eccf
Part number : RX21-10519
Unit of Measure: EA

1398.40 EUR / EA 1398.4 EUR 1,398.40 € excl. VAT

1398.40 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Weyer HOTSPRAY 10 V3 is a portable, electrically heated pressure spraying unit for de-/anti-icing fluids. The Version 3 design incorporates the heater within the vessel, supporting controlled application of heated fluid where localised de-icing is required.

With a 10 L filling capacity, this unit is suited to maintenance and ground-support teams requiring a compact spraying solution for aircraft and airport equipment de-icing tasks. Weyer identifies the HOTSPRAY range for applications including general aviation, helicopters, underwing areas, landing gear, propellers, access steps and frozen ground-support equipment.

  • Manufacturer: Weyer GmbH
  • Roctexo part number: RX21-10519
  • Filling capacity: 10 L
  • Electrical connection: 230 V, 50 Hz, 350 W
  • Maximum pressure: 6 bar
  • Maximum spray capacity: 0.78 L/min
  • Fluid temperature: up to 50 °C
  • Vessel: insulated stainless-steel exterior
  • Dimensions (W × D × H): 26 × 28 × 63 cm
  • Supplied configuration stated by Weyer: 2 m hose, 0.5 m brass lance and adjustable nozzle

The manufacturer describes safety features including a safety valve, pressure gauge, pressure-relief valve and overheat protection. Verify the suitability of the intended fluid and operating procedure before use.

The HOT SPRAY from WEYER: is a portable, electrically heated high-pressure sprayer for de-icing small aircraft, GSE equipment, stairs and similar items.

Defrosting is achieved through heat – the hot spray heats the liquid to 50°C.

You can heat simple water or fill it with special de-icing fluid.

The correct de-icing fluid depends on the intended use. Please observe the fluid manufacturer's safety instructions to determine whether the respective products may be heated

Version

 10 liters


The advantages at a glance:

The heated compressed air tank is easily transportable, can be quickly heated at any electrical outlet, and the insulation keeps the fluid warm for a long time. Suitable for many de-icing fluids, especially aircraft or surface de-icing fluids.

Applications

  • Airport: Equipment, passenger stairs
  • General aviation: De-icing of small aircraft
  • Helicopter: Rotor blades
  • Railway: Steps, wheel housings, couplings, switches
  • Industry: Stairs, equipment, moving parts
  • Vehicle fleet: Connections, superstructures
  • Construction machinery: Superstructures, access ladders, walkways

Further information

  • Lightweight – only 5kg empty weight
  • Heats up quickly with a 500W heating element
  • High quality – with stainless steel container
  • With compressed air connection
  • Easy operation
  • Suitable for aircraft de-icing fluids Type I, II, III or IV

Technical specifications:

  • Electrical connection: 230V – 50Hz – 350W
  • Dimensions W x D x H: 26 x 28 x 56.5 cm
  • Empty weight: 5.7 kg
  • Tank material: Stainless steel, insulated on the outside
  • Max. pressure: 6 bar
  • Max. spray capacity: 0.78 L/min
  • Heating temperature: 50°C
  • Filling capacity: 10 liters
  • Total volume: 13 liters
  • Hose length: 2 m
  • Plastic lance: 0.5 m
  • Nozzle: adjustable
  • Heating: via heating elements integrated into the pump rod

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.