Skip to Content
  1. All Products
  2. All Products
  3. Clamp MS21919-WdG2
Select currency EUR

Image for illustration only. It may show a product series rather than the exact product offered.

Clamp MS21919-WdG2

https://www.roctexo.com/web/image/product.template/37877/image_1920?unique=d7caea6
Part numbers : RX1-MS21919-WDG2 , MS21919WDG2 , MS21919-WDG2
Unit of Measure: EA

0.58 EUR / EA 0.58 EUR 0.58 € excl. VAT

0.58 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
16 EA ready to ship on Monday 2026-10-26
Order before 15:30 CET on Monday 2026-10-26
Up to 4,464 EA ready to ship on Thursday 2026-10-29
Order before 15:30 CET on Monday 2026-10-26
Up to 7,534 EA ready to ship on Monday 2026-11-02
Order before 15:30 CET on Monday 2026-10-26
16,404 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The MS21919WDG2 is a loop-type cushioned clamp intended for securing nominal 3.2 mm (1/8 in) diameter tubing or lines.

It features an aluminium-alloy clamp body with a non-fuel-resistant cushion bonded to the inner surface and clamp edges. The WDG configuration uses a wedge-style cushion designed to provide a close fit and help reduce vibration and line abrasion.

  • Part number: MS21919WDG2
  • Clamp type: MS21919 WDG cushioned loop clamp
  • Nominal tube diameter: 3.2 mm (1/8 in)
  • Body material: aluminium alloy
  • Cushion: bonded, non-fuel-resistant, wedge type
  • Unit of measure: each

Please verify the required part number, clamp series, tube diameter and material suitability against the applicable maintenance data before installation.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

Tube Dia.Dash No.
DG		Dash No.
WDG
1/8MS21919-WDG2WDG2


Overview

Loop-type cushioned aluminum alloy clamp. Cushion (non-fuel resistant) is bonded to inner surface and edges of clamp. WDG clamps are cushion wedge type. Cushion assures tight fit and eliminates vibration, thus preventing line abrasion.

Note: Revision E only applies to WDG clamps. See Tech Data Sheet.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.