Skip to Content
  1. All Products
  2. All Products
  3. Cable Eye MS21255-3Rs
Select currency EUR
Cable Eye MS21255-3Rs

Cable Eye MS21255-3Rs

https://www.roctexo.com/web/image/product.template/14971/image_1920?unique=1ea3a5b
Part numbers : RX1-MS21255-3RS , MS21255-3RS , MS21255-3RS
Unit of Measure: EA

10.80 EUR / EA 10.8 EUR 10.80 € excl. VAT

10.80 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
2 EA ready to ship Today
Order before 15:30 CET Today
Up to 118 EA ready to ship on Monday 2026-08-10
Order before 15:30 CET Today
Up to 254 EA ready to ship on Thursday 2026-08-13
Order before 15:30 CET Today
41 EA available on request, fees apply
Special order from vendor stock.

The MS21255-3RS is a cable eye terminal component for use in MS clip-locking turnbuckle assemblies. It is intended for 3/32 in (2.4 mm) diameter cable and features a 10-32 thread size.

Clip-locking turnbuckle systems use locking clips fitted through aligned slots in the turnbuckle barrel and terminal after cable tension is set. This cable eye is supplied as an individual component for assembly with the applicable barrel, opposite end fitting and locking clips.

  • Part number: MS21255-3RS
  • Component type: cable eye terminal
  • Cable diameter: 3/32 in (2.4 mm)
  • Thread size: 10-32
  • Listed minimum breaking strength: 1,600 lb
  • Unit of measure: each

Please verify the required part number and configuration against the applicable maintenance data before installation.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.