Skip to Content
  1. All Products
  2. All Products
  3. Washer Flat AN970-6
Select currency EUR
Washer Flat AN970-6

Washer Flat AN970-6

https://www.roctexo.com/web/image/product.template/14928/image_1920?unique=9a4d91e
Part numbers : RX1-AN970-6 , 10274-10 , 10274-5 , AN970-6
Unit of Measure: EA

0.58 EUR / EA 0.58 EUR 0.58 € excl. VAT

0.58 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
100 EA ready to ship Today
Order before 15:30 CET Today
Up to 820 EA ready to ship on Monday 2026-08-10
Order before 15:30 CET Today
Up to 1,034 EA ready to ship on Thursday 2026-08-13
Order before 15:30 CET Today
2,080 EA available on request, fees apply
Special order from vendor stock.

The AN970-6 is a flat, wide-area washer designed for 3/8 in (9.5 mm nominal) bolt applications. Its larger bearing surface helps distribute bolt or nut loads over the supporting material.

  • Carbon-steel washer with cadmium plating
  • Nominal bolt size: 3/8 in (9.5 mm)
  • Outside diameter: 1.625 in (41.3 mm)
  • Inside diameter: 0.390 in (9.9 mm)
  • Thickness: 0.063 in (1.6 mm)
  • Suitable where a greater bearing area is required, including under bolt heads and nuts on wooden structures
  • Manufacturer part numbers: 10274-10, 10274-5

Supplied as one each.

Contact Us

Terms and Conditions

Share

Dash No.Bolt SizeO.D.
(in.)		I.D.
(in.)		Thickness
(in.)		Description
63/81.625.390.063Cadmium


Overview

Manufactured of carbon steel, cadmium plated per QQ-P-416C, Type II, Class 2. They provide a greater bearing area than AN960 washers. Used on wooden structures under both the head of the bolt and the nut to prevent crushing the surface.

Reference Chart


These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.