Skip to Content
  1. All Products
  2. All Products
  3. Washer Flat AN960-816
Select currency EUR
Washer Flat AN960-816

Washer Flat AN960-816

https://www.roctexo.com/web/image/product.template/55614/image_1920?unique=070460c
Part numbers : RX1-AN960-816 , 06468-50 , AN960-816
Unit of Measure: EA

0.21 EUR / EA 0.21 EUR 0.21 € excl. VAT

0.21 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
100 EA ready to ship on Monday 2026-08-10
Order before 15:30 CET on Monday 2026-08-10
1,586 EA available on request, fees apply
Special order from vendor stock.

The AN960-816 is a flat washer for use with 1/2 in (12.7 mm) bolt or screw assemblies. It provides a smooth bearing surface beneath a hex nut and may be used where washer thickness is needed to assist with bolt-and-nut grip-length adjustment or castle-nut alignment.

  • Part number: AN960-816
  • Manufacturer part number: 06468-50
  • Superseding NAS reference: NAS1149F0863P
  • For nominal 1/2 in (12.7 mm) bolt or screw size
  • Outside diameter: 0.875 in (approximately 22.2 mm)
  • Inside diameter: 0.515 in (approximately 13.1 mm)
  • Thickness: 0.063 in (approximately 1.6 mm)
  • Unit of measure: each

Please verify the required part number, dimensions and applicable maintenance data before installation.

Contact Us

Terms and Conditions

Share

AN No.Superseding NAS No.Bolt / Screw SizeO.D. (in.)I.D. (in.)Thickness
AN960-816NAS1149F0863PNo. 8160.8750.5150.063

Overview

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt and nut assembly, and to adjust the position of AN310 and AN320 castle nuts with respect to drilled cotter pin holes in bolts and clevis pins. Available in regular and light thickness.

Light Series Washers:
Add the letter "L" to dash number to indicate light series. AN960-416L is a light series cadmium plated steel washer for 1/4" dia. bolt.

Reference Chart


These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.