Skip to Content
  1. All Products
  2. All Products
  3. Washer Flat AN960-716
Select currency EUR
Washer Flat AN960-716

Washer Flat AN960-716

https://www.roctexo.com/web/image/product.template/55613/image_1920?unique=dad1b91
Part numbers : RX1-AN960-716 , 06383-50 , AN960-716
Unit of Measure: EA

0.19 EUR / EA 0.19 EUR 0.19 € excl. VAT

0.19 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
288 EA ready to ship Today
Order before 15:30 CET Today
Up to 907 EA ready to ship on Thursday 2026-08-13
Order before 15:30 CET Today
2,507 EA available on request, fees apply
Special order from vendor stock.

The AN960-716 is a flat washer for use with 7/16 in (11.1 mm) bolts or screws. It provides a smooth bearing surface beneath a nut or fastener head and may be used where washer spacing is required within an appropriate fastener assembly.

  • Part number: AN960-716
  • Manufacturer part number: 06383-50
  • Nominal bolt/screw size: 7/16 in (11.1 mm)
  • Nominal outside diameter: 19.1 mm
  • Nominal inside diameter: 11.5 mm
  • Nominal thickness: 1.6 mm
  • Unit of measure: each

Please verify the required part number, dimensions, material and applicable maintenance data before installation.

Contact Us

Terms and Conditions

Share

AN No.Superseding NAS No.Bolt / Screw SizeO.D. (in.)I.D. (in.)Thickness
AN960 -716NAS1149F0763PNo. 7160.750.4530.063

Overview

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt and nut assembly, and to adjust the position of AN310 and AN320 castle nuts with respect to drilled cotter pin holes in bolts and clevis pins. Available in regular and light thickness.

Light Series Washers:
Add the letter "L" to dash number to indicate light series. AN960-416L is a light series cadmium plated steel washer for 1/4" dia. bolt.


Reference Chart


These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.