Skip to Content

Washer Flat AN960-616L

https://www.roctexo.com/web/image/product.template/94117/image_1920?unique=fdf457d
Part numbers : RX1-AN960-616L , 09611-100 , AN960-616L
Unit of Measure: EA

0.10 EUR / EA 0.1 EUR 0.10 € excl. VAT

0.10 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
750 EA ready to ship Today
Order before 15:30 CET Today
Up to 2,057 EA ready to ship on Monday 2026-08-10
Order before 15:30 CET Today
Up to 13,941 EA ready to ship on Thursday 2026-08-13
Order before 15:30 CET Today
3,507 EA available on request, fees apply
Special order from vendor stock.

The AN960-616L is a light-series flat washer for nominal 3/8 in (9.5 mm) bolt installations. It provides a smooth bearing surface beneath a nut or fastener head and may be used where a thinner washer is required for assembly fit-up.

  • Roctexo part number: RX1-AN960-616L
  • Part designation: AN960-616L
  • Manufacturer part number: 09611-100
  • Light-series flat washer
  • Nominal dimensions: 15.9 mm outside diameter, 9.9 mm inside diameter, 0.8 mm thickness
  • Unit of measure: each

Please verify the required part designation and dimensions against the applicable maintenance data or engineering documentation before installation.

AN No.Superseding NAS No.Bolt / Screw SizeO.D. (in.)I.D. (in.)Thickness
AN960-616LNAS1149F0632P3/8.625.390.032

Overview

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt and nut assembly, and to adjust the position of AN310 and AN320 castle nuts with respect to drilled cotter pin holes in bolts and clevis pins. Available in regular and light thickness.

Light Series Washers:
Add the letter "L" to dash number to indicate light series. AN960-416L is a light series cadmium plated steel washer for 1/4" dia. bolt.

Reference Chart



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.