Skip to Content
  1. All Products
  2. All Products
  3. NAS1149F0532P Washer Flat
Select currency EUR
NAS1149F0532P Washer Flat

NAS1149F0532P Washer Flat

https://www.roctexo.com/web/image/product.template/50851/image_1920?unique=2353db7
Part numbers : RX1-AN960-516L , 08160-50 , AN960-516L
Unit of Measure: EA

0.08 EUR / EA 0.08 EUR 0.08 € excl. VAT

0.08 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
710 EA ready to ship Today
Order before 15:30 CET Today
Up to 13,870 EA ready to ship on Thursday 2026-08-13
Order before 15:30 CET Today
6,445 EA available on request, fees apply
Special order from vendor stock.

NAS1149F0532P is a light-series flat washer intended for 5/16 in (7.9 mm) bolt or screw hardware. Flat washers provide a smooth bearing surface beneath a nut and may be used where a light-thickness washer is required in a hardware assembly.

  • NAS part number: NAS1149F0532P
  • Roctexo part number: RX1-AN960-516L
  • Manufacturer part number: 08160-50
  • Nominal bolt/screw size: 5/16 in (7.9 mm)
  • Nominal outside diameter: 14.3 mm
  • Nominal inside diameter: 8.3 mm
  • Nominal thickness: 0.8 mm
  • Unit of measure: each
Contact Us

Terms and Conditions

Share

AN No.Superseding NAS No.Bolt / Screw SizeO.D. (in.)I.D. (in.)Thickness
AN960-516LNAS1149F0532P5/16.562.328.032

Overview

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt and nut assembly, and to adjust the position of AN310 and AN320 castle nuts with respect to drilled cotter pin holes in bolts and clevis pins. Available in regular and light thickness.

Light Series Washers:
Add the letter "L" to dash number to indicate light series. AN960-416L is a light series cadmium plated steel washer for 1/4" dia. bolt.

Reference Chart

Reference Chart


These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.