Skip to Content
  1. All Products
  2. All Products
  3. Washer Flat AN960-416L NAS1149F0432P
Select currency EUR
Washer Flat AN960-416L NAS1149F0432P

Washer Flat AN960-416L NAS1149F0432P

https://www.roctexo.com/web/image/product.template/90612/image_1920?unique=35855e6
Part numbers : RX1-AN960-416L , 07245-100 , AN960-416L
Unit of Measure: EA

0.09 EUR / EA 0.09 EUR 0.09 € excl. VAT

0.09 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
72 EA ready to ship Today
Order before 15:30 CET Today
Up to 6,389 EA ready to ship on Monday 2026-08-10
Order before 15:30 CET Today
Up to 39,286 EA ready to ship on Thursday 2026-08-13
Order before 15:30 CET Today
3,385 EA available on request, fees apply
Special order from vendor stock.

The AN960-416L is a light-series flat washer manufactured from cadmium-plated steel. It is intended for use with a nominal 6.35 mm (1/4 in) bolt and provides a smooth bearing surface beneath a nut or fastener head.

Flat washers may also be used as shims where appropriate to help obtain the required bolt-and-nut assembly grip length or to assist with castle-nut and cotter-pin alignment.

  • Roctexo part number: RX1-AN960-416L
  • Reference part numbers: AN960-416L, NAS1149F0432P
  • Manufacturer reference: 07245-100
  • Material/finish: cadmium-plated steel
  • Series: light thickness
  • Nominal bolt size: 6.35 mm
  • Outside diameter: 12.7 mm
  • Inside diameter: approximately 6.7 mm
  • Thickness: approximately 0.8 mm
  • Unit of measure: each
Contact Us

Terms and Conditions

Share

AN No.Superseding NAS No.Bolt / Screw SizeO.D. (in.)I.D. (in.)Thickness
AN960-416LNAS1149F0432P1/4.500.265.032

Overview

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt and nut assembly, and to adjust the position of AN310 and AN320 castle nuts with respect to drilled cotter pin holes in bolts and clevis pins. Available in regular and light thickness.

Light Series Washers:
Add the letter "L" to dash number to indicate light series. AN960-416L is a light series cadmium plated steel washer for 1/4" dia. bolt.

Reference Chart

Reference Chart



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.