Skip to Content
  1. All Products
  2. All Products
  3. Washer Flat AN960-4
Select currency EUR
Washer Flat AN960-4

Washer Flat AN960-4

https://www.roctexo.com/web/image/product.template/86697/image_1920?unique=2c76b73
Part numbers : RX1-AN960-4 , 09320-100 , AN960-4
Unit of Measure: EA

0.08 EUR / EA 0.08 EUR 0.08 € excl. VAT

0.08 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
340 EA ready to ship Today
Order before 15:30 CET Today
Up to 11,475 EA ready to ship on Monday 2026-08-10
Order before 15:30 CET Today
Up to 25,172 EA ready to ship on Thursday 2026-08-13
Order before 15:30 CET Today
23,633 EA available on request, fees apply
Special order from vendor stock.

The AN960-4 is a flat steel washer for use with No. 4 bolts or screws. It provides a smooth bearing surface beneath a hex nut and may be used where a washer is required to support a bolted assembly or assist with grip-length adjustment.

  • Part number: AN960-4
  • Roctexo part number: RX1-AN960-4
  • Manufacturer reference: 09320-100
  • Superseding NAS reference: NAS1149FN432P
  • Nominal dimensions: 7.9 mm outside diameter, 3.2 mm inside diameter, 0.8 mm thickness
  • Unit of measure: each

Please verify the required part number and installation requirements against the applicable approved maintenance data before use.

Contact Us

Terms and Conditions

Share

AN No.Superseding NAS No.Bolt / Screw SizeO.D. (in.)I.D. (in.)Thickness
AN960-4NAS1149FN432PNo. 40.3120.1250.032

Overview

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt and nut assembly, and to adjust the position of AN310 and AN320 castle nuts with respect to drilled cotter pin holes in bolts and clevis pins. Available in regular and light thickness.

Light Series Washers:
Add the letter "L" to dash number to indicate light series. AN960-416L is a light series cadmium plated steel washer for 1/4" dia. bolt.

Reference Chart

Reference Chart



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.