Skip to Content
  1. All Products
  2. All Products
  3. O-RinGS AN6230B-2 MS28775-224
Select currency EUR

O-RinGS AN6230B-2 MS28775-224

https://www.roctexo.com/web/image/product.template/37780/image_1920?unique=99b9ec6
Part numbers : RX1-AN6230B-2 , MS28775-224 , AN6230B-2
Unit of Measure: EA

4.21 EUR / EA 4.21 EUR 4.21 € excl. VAT

4.21 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
42 EA ready to ship Today
Order before 15:30 CET Today
Up to 678 EA ready to ship on Monday 2026-08-10
Order before 15:30 CET Today
Up to 1,303 EA ready to ship on Thursday 2026-08-13
Order before 15:30 CET Today
1,932 EA available on request, fees apply
Special order from vendor stock.

MS28775-224 is an O-ring for hydraulic-system sealing applications. It provides a compact, resilient sealing element for use where the applicable maintenance data calls for this part number.

  • Manufacturer part number: MS28775-224
  • Nominal cross-section: 3.2 mm
  • Nominal inside diameter: 44.5 mm
  • Nominal outside diameter: 50.8 mm
  • Referenced for hydraulic-fluid applications using MIL-H-5606-type fluid
  • Unit of supply: each

Confirm the required part number, dimensions, fluid compatibility, and installation requirements against the applicable approved maintenance data before use.

Contact Us

Terms and Conditions

Share

PNMS EquivalentWidthIDOD
AN6230B-2MS28775-2241/81-3/42


Overview

O-rings give effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both directions and reducing friction and wear on moving parts. The use of O-rings as gaskets or static seals permits metal-to-metal contact and allows almost unlimited pressures under extreme vibration.

All O-rings should be lubricated before installation and constant lubrication should be provided for running seals to avoid excessive wear. Avoid sharp edges, threads, and cross-drilled ports over or through which rings must be installed. AN6227B and AN6230B O-rings are manufactured to Spec. MIL-P 25732 for use in hydraulic systems using MIL-0-5606 hydraulic oils. MS28775 O-rings meet Spec. MIL-P- 5510A and are suitable for MIL-0-5606 hydraulic fluid at 160 F.


These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.