Skip to Content
  1. All Products
  2. All Products
  3. O-RinGS AN6227B-5 MS28775-010
Select currency EUR

O-RinGS AN6227B-5 MS28775-010

https://www.roctexo.com/web/image/product.template/127868/image_1920?unique=7f5a7e1
Part numbers : RX1-AN6227B-5 , MS28775-010 , AN6227B-5
Unit of Measure: EA

1.19 EUR / EA 1.19 EUR 1.19 € excl. VAT

1.19 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
160 EA ready to ship Today
Order before 15:30 CET Today
Up to 654 EA ready to ship on Monday 2026-08-10
Order before 15:30 CET Today
Up to 1,246 EA ready to ship on Thursday 2026-08-13
Order before 15:30 CET Today
1,731 EA available on request, fees apply
Special order from vendor stock.

MS28775-010 is an aircraft hydraulic-system O-ring supplied as an individual piece.

According to the available product-source data, this O-ring has an approximate 1.6 mm cross-section, 6.4 mm internal diameter and 9.5 mm outside diameter. It is stated as suitable for use with MIL-O-5606 hydraulic fluid at up to 71 °C.

  • Manufacturer part number: MS28775-010
  • Product type: O-ring seal
  • Unit of measure: Each

Confirm the required part number, material, dimensions and approved maintenance data before installation.

Contact Us

Terms and Conditions

Share

PNMS EquivalentWidthIDOD
AN6227B-5MS28775-0101/161/43/8

Overview

O-rings give effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both directions and reducing friction and wear on moving parts. The use of O-rings as gaskets or static seals permits metal-to-metal contact and allows almost unlimited pressures under extreme vibration.

All O-rings should be lubricated before installation and constant lubrication should be provided for running seals to avoid excessive wear. Avoid sharp edges, threads, and cross-drilled ports over or through which rings must be installed. AN6227B and AN6230B O-rings are manufactured to Spec. MIL-P 25732 for use in hydraulic systems using MIL-0-5606 hydraulic oils. MS28775 O-rings meet Spec. MIL-P- 5510A and are suitable for MIL-0-5606 hydraulic fluid at 160 F.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.