Skip to Content
  1. All Products
  2. All Products
  3. O-RinGS AN6227B-10 MS28775-112
Select currency EUR

Image for illustration only. It may show a product series rather than the exact product offered.

O-RinGS AN6227B-10 MS28775-112

https://www.roctexo.com/web/image/product.template/116333/image_1920?unique=182fd28
Part numbers : RX1-AN6227B-10 , MS28775-112 , AN6227B-10
Unit of Measure: EA

1.12 EUR / EA 1.12 EUR 1.12 € excl. VAT

1.12 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
6 EA ready to ship on Monday 2026-10-26
Order before 15:30 CET on Monday 2026-10-26
Up to 306 EA ready to ship on Thursday 2026-10-29
Order before 15:30 CET on Monday 2026-10-26
Up to 854 EA ready to ship on Monday 2026-11-02
Order before 15:30 CET on Monday 2026-10-26
1,105 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

MS28775-112 is an O-ring seal identified for hydraulic-system use with MIL-O-5606 hydraulic fluid.

  • Manufacturer part number: MS28775-112
  • Nominal cross-section: 2.4 mm
  • Nominal inside diameter: 12.7 mm
  • Nominal outside diameter: approximately 17.5 mm
  • Source-listed suitability: MIL-O-5606 hydraulic fluid at temperatures up to 71 °C

O-rings provide sealing in static and moving applications. Correct selection, lubrication and installation practices are important to help prevent seal damage and premature wear.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

PNMS EquivalentWidthIDOD
AN6227B-10MS28775-1123/321/211/16

Overview

O-rings give effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both directions and reducing friction and wear on moving parts. The use of O-rings as gaskets or static seals permits metal-to-metal contact and allows almost unlimited pressures under extreme vibration.

All O-rings should be lubricated before installation and constant lubrication should be provided for running seals to avoid excessive wear. Avoid sharp edges, threads, and cross-drilled ports over or through which rings must be installed. AN6227B and AN6230B O-rings are manufactured to Spec. MIL-P 25732 for use in hydraulic systems using MIL-0-5606 hydraulic oils. MS28775 O-rings meet Spec. MIL-P- 5510A and are suitable for MIL-0-5606 hydraulic fluid at 160 F.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.