Skip to Content
  1. All Products
  2. All Products
  3. Solid Aluminum Rivets AN470Ad-4-4
Select currency EUR
Solid Aluminum Rivets AN470Ad-4-4

Image for illustration only. It may show a product series rather than the exact product offered.

Solid Aluminum Rivets AN470Ad-4-4

https://www.roctexo.com/web/image/product.template/18305/image_1920?unique=ffe54f0
Part numbers : RX1-AN470AD-4-4 , 15700-1 , AN470AD-4-4
Unit of Measure: LB

42.17 EUR / LB 42.17 EUR 42.17 € excl. VAT

42.17 EUR / LB excl. VAT

Not Available For Sale

This combination does not exist.

Availability
1.75 LB ready to ship Tomorrow
Order before 15:30 CET Tomorrow
Up to 42.88 LB ready to ship on Thursday 2026-10-01
Order before 15:30 CET Tomorrow
8.83 LB available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

Solid aluminium universal-head rivet identified as AN470AD-4-4 and manufacturer part number 15700-1.

This AD-series rivet is manufactured from 2117 aluminium and heat treated to T4 condition. It has a nominal shank diameter of 3.2 mm and a nominal length of 6.4 mm.

  • Rivet designation: AN470AD-4-4
  • Manufacturer part number: 15700-1
  • Head style: universal head
  • Material: 2117 aluminium, T4 condition
  • Nominal diameter × length: 3.2 mm × 6.4 mm
  • Supply unit: lb
Contact Us

Terms and Conditions

Share

Part No.TypeDia. x LengthQty./Lb.
Approx.
AN470AD-4-42117 Hard1/8 x 1/41529

Overview

"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 2117 aluminum and heat treated to the T4 condition. They have a shear strength of 26,000 PSI and a tensile strength of 38,000 PSI. Prices below are for 1lb. quantities. Minimum order of 1/8 lb. (use qty .13). All rivets can be purchased in 1/4 lb. (use qty .25) and 1/8 lb. (use qty .13) packages. AN470 (MS20470) AN426 (MS20426).



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.