Skip to Content
  1. All Products
  2. All Products
  3. Eaton AE401-16 Hose
Select currency EUR
Eaton AE401-16 Hose

Image for illustration only. It may show a product series rather than the exact product offered.

Eaton AE401-16 Hose

https://www.roctexo.com/web/image/product.template/21103/image_1920?unique=1ef2b2c
Part numbers : RX1-AE401-16 , AE401-16 , AE401-16
Unit of Measure: FT

82.90 EUR / FT 82.9 EUR 82.90 € excl. VAT

82.90 EUR / FT excl. VAT

Not Available For Sale

This combination does not exist.

Availability
16 FT available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Eaton Aeroquip AE401-16 is a size -16 wire-reinforced synthetic rubber hose with an integral silicone rubber cover. It is intended for use where the AE401 hose specification is required.

  • Manufacturer: Eaton
  • Manufacturer part number: AE401-16
  • Roctexo part number: RX1-AE401-16
  • Hose size: -16
  • Construction: 601/AE701 hose with integral silicone rubber cover
  • Maximum outside diameter: 37 mm
  • Minimum inside diameter: 21 mm
  • Minimum bend radius: approximately 140 mm
  • Listed operating pressure for size -16: 1,000 psi
  • Manufacturer-listed applications: fuel, engine oil and coolant systems
  • Unit of measure: foot

For installation and assembly selection, refer to the applicable Eaton technical documentation and the approved aircraft maintenance data. Eaton notes that AE401 hose is not intended for vacuum applications; intermittent vacuum applications may require an internal support coil.

Documentation: Eaton Aeroquip Wire Reinforced Synthetic Rubber Hose technical brochure.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.