Skip to Content
  1. All Products
  2. All Products
  3. Eaton AE401-12 Hose
Select currency EUR
Eaton AE401-12 Hose

Image for illustration only. It may show a product series rather than the exact product offered.

Eaton AE401-12 Hose

https://www.roctexo.com/web/image/product.template/33627/image_1920?unique=8d75477
Part numbers : RX1-AE401-12 , AE401-12 , AE401-12
Unit of Measure: FT

77.84 EUR / FT 77.84 EUR 77.84 € excl. VAT

77.84 EUR / FT excl. VAT

Not Available For Sale

This combination does not exist.

Availability
3.46 FT available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Eaton Aeroquip AE401-12 is a dash-size -12 wire-reinforced synthetic rubber hose with an integral silicone rubber firesleeve. It is supplied by length for use where the applicable approved maintenance data, hose specification and installation requirements call for AE401-12 hose.

  • Manufacturer: Eaton Aeroquip
  • Manufacturer part number: AE401-12
  • Hose construction: synthetic rubber inner tube with stainless-steel wire-braid reinforcement and integral silicone rubber cover
  • Dash size: -12
  • Minimum bore: 16.9 mm
  • Maximum outside diameter: 31.8 mm
  • Minimum bend radius: 114 mm
  • Maximum operating pressure: 86 bar
  • Temperature range: -54 °C to +149 °C
  • Basic specification: MIL-H-83797; Eaton lists TSO-C53a Type C

Eaton identifies the AE401 series for fuel, engine-oil and coolant service. This hose is not intended for vacuum applications; installations exposed to intermittent vacuum require assessment against the applicable Eaton guidance.

Sold by length; order quantity is measured in feet. Confirm the required hose length, end fittings, routing and applicable approved data before installation.

Documentation: Eaton Aeroquip wire-reinforced synthetic rubber hose data sheet.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.