Skip to Content
  1. All Products
  2. All Products
  3. Mil-Dtl-6000D Oil & Coolant Hose 3/4 Id
Select currency EUR
Mil-Dtl-6000D Oil & Coolant Hose 3/4 Id

Mil-Dtl-6000D Oil & Coolant Hose 3/4 Id

https://www.roctexo.com/web/image/product.template/86458/image_1920?unique=d270800
Part numbers : RX1-6000-12 , 00850721306 , 6000-12
Unit of Measure: FT

13.80 EUR / FT 13.8 EUR 13.80 € excl. VAT

13.80 EUR / FT excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 551 FT ready to ship on Thursday 2026-08-27
Order before 16:00 CET Tomorrow
Up to 611 FT ready to ship on Monday 2026-08-31
Order before 16:00 CET Tomorrow
422 FT available on request, fees apply
Special order from vendor stock.

MIL-DTL-6000D flexible oil and coolant hose for aircraft maintenance applications, supplied in one-foot increments. This 19 mm (3/4 in) ID hose is identified by Roctexo part number RX1-6000-12 and manufacturer part number 00850721306.

The hose has an oil-resistant tube and a black outer cover reinforced with high-strength, mildew-resistant yarns. It is designed for exposure to oil, alcohol, coolant and water, while retaining a lightweight, flexible construction for routing in confined areas.

  • Internal diameter: 19 mm (3/4 in)
  • Outside diameter: approximately 29 mm (1-1/8 in)
  • Burst pressure: 69 bar (1,000 psi)
  • Temperature range: -40 °C to +121 °C
  • Referenced specification: MIL-DTL-6000D
  • Not recommended for use as a fuel line.

Sold by the foot. Please confirm the required hose size and suitability for the intended installation before purchase.

Contact Us

Terms and Conditions

Share

PNIDODBurst PSI
6000-123/41-1/81000

Overview

Inside and out, aircraft hose MIL-DTL 6000D is designed to handle the effects of oil, alcohol, coolant, and water. The tube is oil resistant with a black cover reinforced with high strength mildew resistant yarns. It withstands extreme temperature conditions from -40F to +250F. Meets or exceeds U.S. military specs. Lightweight, flexible and easy-to-handle, making it the perfect hose for hard-to-get-to spots in tight engine compartments.

Sold in one foot increments.
MIL-DTL-6000C was superceded by this MIL-DTL-6000D
Note: This hose is not recommended for use as fuel lines.

Reference Chart


These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.