Skip to Content
  1. All Products
  2. All Products
  3. Eaton Aeroquip Hose 303-10 5/8
Select currency EUR
Eaton Aeroquip Hose 303-10 5/8

Image for illustration only. It may show a product series rather than the exact product offered.

Eaton Aeroquip Hose 303-10 5/8

https://www.roctexo.com/web/image/product.template/44758/image_1920?unique=76c7042
Part numbers : RX1-303-10 , 303-10 , 303-10
Unit of Measure: FT

18.73 EUR / FT 18.73 EUR 18.73 € excl. VAT

18.73 EUR / FT excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 39 FT ready to ship on Thursday 2026-10-01
Order before 16:00 CET on Tuesday 2026-09-29
Up to 72 FT ready to ship on Monday 2026-10-05
Order before 16:00 CET on Tuesday 2026-09-29
210.63 FT available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Eaton Aeroquip 303-10 is a medium-pressure, wire-reinforced synthetic-rubber hose for aircraft fluid-conveyance applications. It is supplied by the foot and is identified by manufacturer part number 303-10 and Roctexo part number RX1-303-10.

  • Hose size: -10, for 15.9 mm (5/8 in) tube size
  • Nominal hose inside diameter: 12.7 mm (1/2 in)
  • Maximum working pressure: 1,750 psi
  • Operating temperature range: -54 °C to +122 °C
  • Construction: seamless synthetic-rubber inner tube, cotton braid and single-wire braid reinforcement, with an oil-resistant braided outer cover
  • Hose specification: MIL-DTL-8794

Eaton identifies Aeroquip 303 hose for aircraft hydraulic, pneumatic, fuel, oil and coolant systems. Confirm the required hose size, pressure rating, fluid compatibility, routing and approved installation data before use. Eaton documentation describes the 303 hose series for use with Aeroquip 491 hose fittings.

Documentation: Eaton Aeroquip hose identification, selection and assembly guide.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.