Skip to Content
  1. All Products
  2. All Products
  3. Camloc Fasteners 2600-5 Studs
Select currency EUR

Camloc Fasteners 2600-5 Studs

https://www.roctexo.com/web/image/product.template/70962/image_1920?unique=090e165
Part numbers : RX1-2600-5 , 2600-5 , 2600-5
Unit of Measure: EA

8.92 EUR / EA 8.92 EUR 8.92 € excl. VAT

8.92 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
20 EA ready to ship Tomorrow
Order before 15:30 CET Tomorrow
Up to 495 EA ready to ship on Thursday 2026-09-03
Order before 15:30 CET Tomorrow
Up to 653 EA ready to ship on Monday 2026-09-07
Order before 15:30 CET Tomorrow
364 EA available on request, fees apply
Special order from vendor stock.

Camloc 2600-5 is a cadmium-plated, slotted quarter-turn fastener stud for use in 2600 series fastener assemblies. It is supplied as an individual item.

  • Manufacturer part number: 2600-5
  • Roctexo part number: RX1-2600-5
  • Configuration: cadmium-plated slotted stud
  • Total grip range: 4.6–5.3 mm
  • Receptacle selection reference: 212-12
  • Installation note: retaining washers are required for -5 length studs and longer.

Please confirm the required grip range and installation configuration against the applicable maintenance data before purchase and installation.

Contact Us

Terms and Conditions

Share

TypeDescriptionPart No.
Cad Plated SlottedCamloc Fastener Stud2600-5

Overview

2600 STUD LENGTH SELECTION
Total material thickness “G” consists of the thickness of all materials to be fastened. This must include the thickness of the material “P” to which the stud assembly is attached, the material “F” to which the receptacle is attached plus gaskets (if used) and allowance for paint or other protective finishes. If the total thickness is near the upper limit of the stud grip range, the next longer stud should be used. This will still maintain positive locking of the fastener under vibration.

P (panel thickness)..................... .062
F (frame thickness................... + .062
GRIP (total thickness).............. = .124


STUD SELECTION TABLE
Using 212-12 Receptacle
Total Grip ThicknessUse 2600
.020-.0592600-1
.060-.0892600-2
.090-.1192600-3
.120-.1492600-4
.150-.1792600-5
.180-.2092600-6
.210-.2392600-7
.240-.2692600-8
.270-.2992600-9
.300-.3292600-10
.330-3592600-11
.360-3892600-12
.390-.4192600-13
.420-.4492600-14


2600, 2700 SERIES RETAINING WASHER
Retaining washers are required for studs of -5 length or greater. Use split washer 2600- SW2 where it is desirable to have the stud fall away for minimum internal projection. Use internal tooth washer 2600-LW where it is desirable to retain the stud assembly rigidly.
2600, 2700 SERIES RECEPTACLES
Rivet Holes2600, 2700 Series Part No.
Plain212-12N
Countersunk212-12ND



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.