Skip to Content
  1. All Products
  2. All Products
  3. Aircraft Rivet Gun #2602A
Select currency EUR
Aircraft Rivet Gun #2602A

Aircraft Rivet Gun #2602A

https://www.roctexo.com/web/image/product.template/49856/image_1920?unique=6d98cf8
Part numbers : RX1-12-18340 , 2602A , 12-18340
Unit of Measure: EA

187.85 EUR / EA 187.85 EUR 187.85 € excl. VAT

187.85 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 7 EA ready to ship on Thursday 2026-09-03
Order before 16:00 CET on Tuesday 2026-09-01
Up to 11 EA ready to ship on Monday 2026-09-07
Order before 16:00 CET on Tuesday 2026-09-01
21 EA available on request, fees apply
Special order from vendor stock.

The Aircraft Rivet Gun #2602A is a pneumatic riveting tool for controlled installation of solid rivets. Its teasing throttle supports gradual starts and precise trigger control during riveting work.

  • Manufacturer part number: 2602A
  • Roctexo part number: RX1-12-18340
  • .401 shank for compatible rivet sets
  • Operating speed: 0–2,600 blows per minute
  • Air requirement: 3 CFM at 6.2 bar
  • Specified to drive aluminium rivets up to 4.8 mm and steel rivets up to 3.2 mm
  • Suitable for controlled work on rivets from 2.4 mm to 4.8 mm
  • Approximate product weight: 1.75 kg

A practical choice where a lightweight, controllable pneumatic rivet gun is required for aircraft sheet-metal work. Parts are stated to be interchangeable with Chicago Pneumatic X-Guns.

Contact Us

Terms and Conditions

Share

DescriptionPN
Aircraft Rivet Gun #2602A12-18340

Overview

With this popular 2602 Rivet Gun, it's now much lighter and features parts that are interchangeable with Chicago Pneumatic X-Guns. Of course, it still has the same great control that has made our 2602 gun so popular. Excellent teasing throttle for slow starts (so that you don't work harden the rivet before it is set), and enough power to drive 3/16" aluminum (1/8" steel) rivets. This gun is so controllable you can properly buck rivets as small as 3/32" or as large as 3/16". This tool is recommended by many of the kit manufacturers such as the RV-4, Thorp T-18, and the Midget Mustang. 0-2600 BPM, 3CFM required at 90 psi, .401 shank. 4lbs shipping weight.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.