Skip to Content
  1. All Products
  2. All Products
  3. Dillon Quick Check Tension Meter 10000 Lb.
Select currency EUR
Dillon Quick Check Tension Meter 10000 Lb.

Image for illustration only. It may show a product series rather than the exact product offered.

Dillon Quick Check Tension Meter 10000 Lb.

https://www.roctexo.com/web/image/product.template/66000/image_1920?unique=182fd28
Part numbers : RX1-12-03324 , AWT05-508111 , 12-03324
Unit of Measure: EA

3454.55 EUR / EA 3454.549277501901 EUR 3,454.55 € excl. VAT

3454.55 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Dillon Quick-Check is a portable digital tension meter for measuring and setting tension in compatible wire rope and cable installations. This 10,000 lb model is identified by manufacturer part number AWT05-508111.

  • Rated capacity: 10,000 lb / 45 kN / 4,500 kg
  • Wire-size range: 4.75 mm to 25.4 mm
  • Supports selection of pre-calibrated wire-rope sizes and types for the applicable installation
  • Check-tensioning mode provides a graphical indication of current and target tension settings
  • Designed for portable use, with a clamp-on arrangement for placing the meter on and removing it from the cable

Suitable for maintenance and inspection work where cable tension must be measured against the correct calibration profile. Verify the required wire-rope construction, diameter and calibration configuration before ordering or use.

Manufacturer part number: AWT05-508111

Documentation: Dillon Quick-Check brochure, comparative matrix and user manual are available from the manufacturer.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.