Skip to Content
  1. All Products
  2. All Products
  3. Cherry G27 Hand Rivet Gun Only
Select currency EUR
Cherry G27 Hand Rivet Gun Only

Image for illustration only. It may show a product series rather than the exact product offered.

Cherry G27 Hand Rivet Gun Only

https://www.roctexo.com/web/image/product.template/44219/image_1920?unique=24956ae
Part numbers : RX1-12-03105 , G27 , 12-03105
Unit of Measure: EA

261.13 EUR / EA 261.13 EUR 261.13 € excl. VAT

261.13 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
1 EA available on request, fees apply
Special order from vendor stock.

The Cherry G27 is a compact hand-powered riveter designed for manual installation of 3.2 mm CherryMAX® blind rivets. It provides a practical installation option where pneumatic riveting tools cannot be used due to limited access or the absence of an air supply.

The pulling head is integral to the tool. The manufacturer specifies an overall length of approximately 235 mm and a net tool weight of approximately 0.37 kg.

  • Manufacturer part number: G27
  • Hand-powered mechanical riveter
  • Designed for 3.2 mm CherryMAX® rivets
  • Integral pulling head
  • Suitable for maintenance, repair and prototype-type work where manual riveting is required

Use only in accordance with the applicable maintenance data and the current Cherry Aerospace tooling and fastener documentation.

Relevant documentation: Cherry Aerospace G27 Tool Manual (TM-G27).

Contact Us

Terms and Conditions

Share

Overview

The Cherry® G-27 Hand Riveter is designed specifically for the most efficient installation of 1/8" Cherry®MAX Rivets. The G-27 Riveter is intended for use where access or power limitation prevents the use of Cherry® pneumatic power tools. Overall length of the G-27 is 9-1/4", the net weight is just 13 ounces and the pulling head is an integral part of the tool.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.