Skip to Content
  1. All Products
  2. All Products
  3. Cherry H563-6B Pulling Head
Select currency EUR
Cherry H563-6B Pulling Head

Image for illustration only. It may show a product series rather than the exact product offered.

Cherry H563-6B Pulling Head

https://www.roctexo.com/web/image/product.template/61837/image_1920?unique=b7ae3b7
Part numbers : RX1-12-03063 , H563-6B , 12-03063
Unit of Measure: EA

2165.21 EUR / EA 2165.21 EUR 2,165.21 € excl. VAT

2165.21 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Cherry Aerospace H563-6B is an offset pulling head for installation of -06 Lockbolt® fasteners, corresponding to a 4.8 mm fastener diameter.

The offset configuration is intended for Lockbolt installation tasks where access geometry makes a straight pulling head unsuitable. It is listed by Cherry Aerospace for use with selected Cherry riveters, including G83 and G84 series tools. Refer to the applicable tool manual and pulling-head technical data before installation and use.

  • Manufacturer: Cherry Aerospace
  • Manufacturer part number: H563-6B
  • Type: Offset Lockbolt pulling head
  • Lockbolt diameter: -06 / 4.8 mm
  • Roctexo part number: RX1-12-03063

Relevant documentation: Cherry Aerospace H563B Lockbolt Offset Pulling Head Technical Data Sheet.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.