Skip to Content
  1. All Products
  2. All Products
  3. Diff Cylinder Press Test Cmbo >5Bo
Select currency EUR

Diff Cylinder Press Test Cmbo >5Bo

https://www.roctexo.com/web/image/product.template/101324/image_1920?unique=758f503
Part numbers : RX1-12-02347 , 2EM-60 , 12-02347
Unit of Measure: EA

152.45 EUR / EA 152.45 EUR 152.45 € excl. VAT

152.45 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The 2EM-60 is a differential cylinder pressure tester with an integrated master orifice, intended for comparative cylinder leakage checks on large-bore engines. The master-orifice arrangement allows the observed leakage reading to be compared with a calibrated reference.

  • Manufacturer part number: 2EM-60
  • Large-bore configuration with 0.060 in master orifice
  • Precision gauges matched within ±2%
  • Includes an 18 mm spark-plug adapter and approximately 610 mm pressure hose
  • Supplied with instructions and a form-fitted protective hard case
  • Recorded product weight: 1.86 kg

For use, selection and interpretation of test results, follow the applicable engine manufacturer maintenance data and procedures.

Contact Us

Terms and Conditions

Share

Overview

The Model 2EM-60 Differential Cylinder Pressure Tester combines the features of the popular 2E tester and a Master Orifice into one tool. Now you can conveniently check your engine's leakdown rate against a calibrated standard to instantly determine if your engine's cylinder leakage is within the manufacturer's limits. Specifications: Orifice size is .060". precision gauges matched to within +/-2%. Includes 18MM Spark Plug Adapter, 24" pressure hose, and complete instructions. Protective form-fitted hard case included. Factory calibrated. Letter of certification available upon request.

This differential pressure tester has a .060" orifice and is intended for use with engines whose bore diameters exceed 5" per AC43.13 REV 1B. However, Lycoming and Continental service specifications call for the use of a standard tester (with a .040" orifice) even if their engine’s bore diameters exceed 5", and for those engines you must comply with the manufacturer's specifications and use a standard tester such as the 2EM instead of this unit.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.