Skip to Content

Diff Cylinder Press Tester <5 Bore

https://www.roctexo.com/web/image/product.template/49716/image_1920?unique=4b7cb7d
Part numbers : RX1-12-02344 , 2E , 12-02344
Unit of Measure: EA

135.93 EUR / EA 135.93 EUR 135.93 € excl. VAT

135.93 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Differential Cylinder Pressure Tester is a differential-pressure test instrument for evaluating engine cylinders with bore sizes below 127 mm (5 in). It is supplied with an 18 mm spark-plug adapter and pressure hose for cylinder testing tasks.

The tester incorporates an on/off safety valve to release pressure before disconnecting from the cylinder. It can be used during diagnostic work to help assess conditions associated with intake or exhaust valves, piston rings, cylinders and bushings.

  • Manufacturer part number: 2E
  • For engine cylinders with bore sizes below 127 mm (5 in)
  • 18 mm plug adapter included
  • Pressure hose included; approximately 610 mm (24 in) long
  • 0.040 in orifice with 0.250 in length and 60° approach angle
  • Precision gauges matched within ±2%
  • On/off safety valve for pressure release before disconnection

Unit of measure: each.

Overview

This tester comes complete with on-off safety valve to eliminate pressure when disconnecting from the cylinder. Can be used to check intake or exhaust valves, cracked or worn rings, defective cylinders, worn bushings, etc. Specifications: Orifice size is .040". precision gauges matched to within +/-2%. 18MM plug adapter. 24" pressure hose.

Includes hose and spark plug adapter. Factory calibrated. Letter of certification available upon request.

Note: For an engine cylinder having less than a 5.00-inch bore; 0.040-inch orifice diameter; .250 inch long; and a 60-degree approach angle.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.