Skip to Content
  1. All Products
  2. All Products
  3. Avery Pop Rivet Dimpler 3/32
Select currency EUR
Avery Pop Rivet Dimpler 3/32

Image for illustration only. It may show a product series rather than the exact product offered.

Avery Pop Rivet Dimpler 3/32

https://www.roctexo.com/web/image/product.template/114750/image_1920?unique=1e44d0e
Part numbers : RX1-12-00613 , 1022 , 12-00613
Unit of Measure: EA

28.06 EUR / EA 28.06 EUR 28.06 € excl. VAT

28.06 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 6 EA ready to ship on Monday 2026-09-28
Order before 17:00 CET on Friday 2026-09-25
Up to 12 EA ready to ship on Thursday 2026-10-01
Order before 17:00 CET on Friday 2026-09-25
18 EA available on request, fees apply
Special order from vendor stock.

The Avery Pop Rivet Dimpler 3/32 is a compact dimpling tool for sheet-metal work in areas where access is limited. It is designed for use with a hand pop-rivet tool and can be reused for occasional maintenance or fabrication tasks.

  • Manufacturer part number: 1022
  • Size: 3/32 in
  • Designed for use with hand pop-rivet tools
  • Suitable for 100° and 120° rivets
  • Uses a 100° dimple angle, comparable to standard dimple dies
  • Replacement nails are included; standard hardware-store nails may also be used

Pop-rivet dimplers apply less forming pressure than a squeezer or hammer-operated dimple die. The resulting dimple may therefore be less sharply defined, making this tool particularly useful for occasional work in tight or otherwise difficult-to-reach locations.

Contact Us

Terms and Conditions

Share

Overview

For dimpling in hard to reach places. Works with any hand pop rivet tool. Can be used over & over. Works for both 100 & 120 pop rivets. Extra nails included (Uses standard hardware store nails). 2 sizes available.
Note: The pop rivet dimplers show above are made with 100° angles, same as regular dimple dies. They will work with either solid flush rivets (AN-426 – 100°) or with pull type rivets such as a AVEX rivets (120°), etc. The dimple formed with these pop rivet dies will not be as ‘sharp’ as dimples formed with regular dimple dies. This is because you get more pressure with a squeezer or a hammer than with a pop rivet puller; however, the dimples formed with pop rivet dimplers are adequate for occasional use in tight or hard-to-use places.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.