Skip to Content
  1. All Products
  2. All Products
  3. Avery Pop Rivet Dimpler 3/32
Select currency EUR
Avery Pop Rivet Dimpler 3/32

Image for illustration only. It may show a product series rather than the exact product offered.

Avery Pop Rivet Dimpler 3/32

https://www.roctexo.com/web/image/product.template/114750/image_1920?unique=182fd28
Part numbers : RX1-12-00613 , 1022 , 12-00613
Unit of Measure: EA

29.01 EUR / EA 29.01 EUR 29.01 € excl. VAT

29.01 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 6 EA ready to ship on Thursday 2026-10-29
Order before 16:00 CET on Tuesday 2026-10-27
Up to 12 EA ready to ship on Monday 2026-11-02
Order before 16:00 CET on Tuesday 2026-10-27
18 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Avery Pop Rivet Dimpler 3/32 is a compact dimpling tool for sheet-metal work in areas where access is limited. It is designed for use with a hand pop-rivet tool and can be reused for occasional maintenance or fabrication tasks.

  • Manufacturer part number: 1022
  • Size: 3/32 in
  • Designed for use with hand pop-rivet tools
  • Suitable for 100° and 120° rivets
  • Uses a 100° dimple angle, comparable to standard dimple dies
  • Replacement nails are included; standard hardware-store nails may also be used

Pop-rivet dimplers apply less forming pressure than a squeezer or hammer-operated dimple die. The resulting dimple may therefore be less sharply defined, making this tool particularly useful for occasional work in tight or otherwise difficult-to-reach locations.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

Overview

For dimpling in hard to reach places. Works with any hand pop rivet tool. Can be used over & over. Works for both 100 & 120 pop rivets. Extra nails included (Uses standard hardware store nails). 2 sizes available.
Note: The pop rivet dimplers show above are made with 100° angles, same as regular dimple dies. They will work with either solid flush rivets (AN-426 – 100°) or with pull type rivets such as a AVEX rivets (120°), etc. The dimple formed with these pop rivet dies will not be as ‘sharp’ as dimples formed with regular dimple dies. This is because you get more pressure with a squeezer or a hammer than with a pop rivet puller; however, the dimples formed with pop rivet dimplers are adequate for occasional use in tight or hard-to-use places.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.