Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

AeroLEDs Pulsar 660 EXP Wingtip Forward & Tail Position / Anti-Collision Light Left (14V)

https://www.roctexo.com/web/image/product.template/290912/image_1920?unique=ade74d3
Part numbers : RX1-11-21048 , 01-1380-C-12-L , 11-21048
Unit of Measure: EA

469.19 EUR / EA 469.19 EUR 469.19 € excl. VAT

469.19 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
4 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The AeroLEDs Pulsar 660 EXP, manufacturer part number 01-1380-C-12-L, is a left-hand 14 VDC LED wingtip assembly for experimental aircraft. It combines a red forward position light, aft-facing white tail position light and white anti-collision light in one aerodynamic, low-drag unit.

The assembly uses high-efficiency LEDs and incorporates a UV-hardcoated polycarbonate lens, clear-anodised aluminium base, built-in thermal protection, and resistance to shock and vibration. No external power supply is required.

  • Manufacturer: AeroLEDs
  • Manufacturer part number: 01-1380-C-12-L
  • Configuration: left-hand, red forward position / white rear position / white anti-collision
  • Electrical system: 14 VDC
  • Current draw: position light 0.8 A; anti-collision light 0.8 A average, 3.8 A peak
  • Mounting: industry-standard three-position screw pattern; mounting bracket included
  • Approximate dimensions: 102 × 48 × 38 mm
  • Strobe synchronisation: compatible with AeroLEDs SunTail 550 EXP synchronisation

Approval status: This is an experimental-use product and is not EASA/FAA approved. It is not approved for use on certified aircraft. Refer to the applicable AeroLEDs installation instructions and datasheet for installation, wiring and operational limitations.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.