Skip to Content
  1. All Products
  2. All Products
  3. Garmin GCO 14 Carbon Monoxide Detector for G3X Experimental
Select currency EUR
Garmin GCO 14 Carbon Monoxide Detector for G3X Experimental

Garmin GCO 14 Carbon Monoxide Detector for G3X Experimental

https://www.roctexo.com/web/image/product.template/287665/image_1920?unique=83b9169
Part numbers : RX1-11-20849 , 010-02975-01 , 11-20849
Unit of Measure: EA

523.38 EUR / EA 523.38 EUR 523.38 € excl. VAT

523.38 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 1 EA ready to ship on Monday 2026-08-17
Order before 17:00 CET on Friday 2026-08-14
1 EA available on request, fees apply
Special order from vendor stock.

The Garmin GCO 14 is a compact remote-mount carbon monoxide (CO) detector for G3X Experimental installations. It monitors cabin CO levels through compatible Garmin avionics, enabling visual alerts and, where supported by the installed avionics configuration, aural alerting when potentially hazardous CO exposure is detected.

The lightweight module is intended for behind-panel installation and is supplied with its required installation wiring harness. Garmin specifies a sensor life of up to 10 years; the detector may be disconnected and replaced through its 4-pin connector when required.

  • Manufacturer: Garmin
  • Manufacturer part number: 010-02975-01
  • Product: GCO 14 carbon monoxide detector
  • For: G3X Experimental installations
  • Approximate module dimensions: 22 x 31 x 37 mm
  • Approximate module mass: 28 g
  • Sensor life: up to 10 years
  • Included: GCO 14 wiring harness

Installation and system integration should be performed in accordance with the applicable Garmin documentation and the configuration requirements of the installed avionics.

Documentation: Garmin GCO 14 product information.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.