Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Aveo Daylite Series Gliderburstng Wingtip Strobe Only Light

https://www.roctexo.com/web/image/product.template/283272/image_1920?unique=d4bec37
Part numbers : RX1-11-20630 , AVE-WLSOEA-2OD , 11-20630
Unit of Measure: EA

301.51 EUR / EA 301.51 EUR 301.51 € excl. VAT

301.51 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 1 EA ready to ship on Monday 2026-10-05
Order before 17:00 CET on Friday 2026-10-02
Up to 3 EA ready to ship on Thursday 2026-10-08
Order before 17:00 CET on Friday 2026-10-02
1 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Aveo Engineering GliderBurst NG DayLite is a compact wingtip LED light providing a white strobe function only. Its low-profile housing measures 115 x 33 x 26 mm and has a stated maximum weight of 64 g.

Designed for 9–36 VDC electrical systems, the GliderBurst NG DayLite provides a strobe repetition rate of 50 cycles per minute. The unit incorporates overheat, reverse-polarity, transient-voltage, under-voltage and over-voltage protection.

  • Manufacturer: Aveo Engineering
  • Manufacturer part number: AVE-WLSOEA-2OD
  • Function: white wingtip strobe only
  • Operating voltage: 9–36 VDC
  • Peak input current: 2.06 A at 14 V; 0.91 A at 28 V
  • Peak input power: 28.8 W at 14 V; 25.5 W at 28 V
  • Strobe rate: 50 cycles per minute
  • Dimensions: 115 x 33 x 26 mm
  • Maximum weight: 64 g
  • Recommended mounting screw size: M3; stainless steel recommended
  • Operating temperature: -40 °C to +85 °C
  • Waterproof, dust-proof, shock-proof and vibration-proof construction

Not EASA/FAA approved for installation on certified aircraft. This is not a TSO-certified light. Refer to the manufacturer’s installation manual and applicable aircraft or equipment requirements before installation.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.