Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

uAvionix Ping Station 3 Ground Station Ads-B Receiver

https://www.roctexo.com/web/image/product.template/54631/image_1920?unique=dd3d312
Part numbers : RX1-11-19343 , UAX-90083-01 , 11-19343
Unit of Measure: EA

3186.67 EUR / EA 3186.67 EUR 3,186.67 € excl. VAT

3186.67 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
2 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The uAvionix pingStation 3 is a ground-based, dual-band ADS-B receiver for receiving 978 MHz UAT and 1090 MHz ADS-B transmissions simultaneously. Manufacturer part number: UAX-90083-01.

Designed as a networkable surveillance receiver, pingStation 3 combines the ADS-B receiver, GPS and antenna arrangement in an IP67-rated weatherproof enclosure. Power and data are supplied through a single Power-over-Ethernet connection, while the included pole-mount hardware supports straightforward external installation.

  • Simultaneous 978 MHz UAT and 1090 MHz ADS-B reception
  • IP67-rated weatherproof enclosure
  • Integrated GPS for message timestamping
  • Power-over-Ethernet interface
  • Ethernet data outputs including ASTERIX CAT 021, JSON UDP and Compressed VRS
  • Configuration through a web interface

Manufacturer-listed supplied items include a fibreglass mast antenna, mounting arm and strap, stainless-steel hose clamp, quick-start card and IP67-rated M12-to-RJ45 Ethernet cable.

Relevant manufacturer documentation includes the pingStation 3 User and Installation Guide (UAV-1005950-001, Rev G), Interface Control Document (UAV-1005951-001, Rev E), FlightLine ASTERIX CAT021 Feed document (UAV-1007504-001, Rev A), and Declaration of Conformity (UAV-1007866-001, Rev B).

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.