Skip to Content
  1. All Products
  2. All Products
  3. AeroLEDs SunSpot 36-4313 (100W) Landing Light FAA-PMA (14V)
Select currency EUR
AeroLEDs SunSpot 36-4313 (100W) Landing Light FAA-PMA (14V)

Image for illustration only. It may show a product series rather than the exact product offered.

AeroLEDs SunSpot 36-4313 (100W) Landing Light FAA-PMA (14V)

https://www.roctexo.com/web/image/product.template/36805/image_1920?unique=8c1cb9e
Part numbers : RX1-11-17127 , 01-1030-4313 , 11-17127
Unit of Measure: EA

642.93 EUR / EA 642.93 EUR 642.93 € excl. VAT

642.93 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 5 EA ready to ship on Monday 2026-10-05
Order before 17:00 CET on Friday 2026-10-02
Up to 12 EA ready to ship on Thursday 2026-10-08
Order before 17:00 CET on Friday 2026-10-02
9 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The AeroLEDs SunSpot 36-4313 is a 14 VDC LED landing light in the SunSpot 36-4000 100 W series. Manufactured as a PAR36-format landing light, it is intended for installations using a standard PAR36 mount.

Manufacturer part number: 01-1030-4313

  • 14 VDC, 100 W maximum power consumption
  • Landing-light beam profile: 20° × 20°
  • Peak intensity: 200,000 candela
  • Maximum current: 6.8 A at 14 VDC
  • FAA-PMA/STC approved
  • Standard PAR36 mounting format
  • This 01-1030-4313 version is supplied without the built-in wig-wag/synchronisation function available on “-H” variants.

AeroLEDs specifies a UV-coated polycarbonate lens and an aluminium, black powder-coated heat sink for the SunSpot 36-4000 100 W series.

For installation instructions, technical data and applicable approval documentation, consult the AeroLEDs SunSpot 36-4000 100 W product documentation and the AeroLEDs landing and taxi light installation-manual library.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.