Skip to Content
  1. All Products
  2. All Products
  3. MGL Color Universal Engine Monitor (Blaze Series)
Select currency EUR
MGL Color Universal Engine Monitor (Blaze Series)

Image for illustration only. It may show a product series rather than the exact product offered.

MGL Color Universal Engine Monitor (Blaze Series)

https://www.roctexo.com/web/image/product.template/114590/image_1920?unique=cf56678
Part numbers : RX1-11-16722 , BLAZE-EMS-2 , EMS-2 , 11-16722
Unit of Measure: EA

437.19 EUR / EA 437.19 EUR 437.19 € excl. VAT

437.19 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 2 EA ready to ship on Monday 2026-09-28
Order before 17:00 CET Tomorrow
Up to 3 EA ready to ship on Thursday 2026-10-01
Order before 17:00 CET Tomorrow
4 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The MGL Avionics Blaze EMS-2 is a compact universal engine-monitoring instrument in the Blaze Series. Designed for a standard 80 mm (3 1/8 in) instrument position, it combines configurable engine data presentation with a high-resolution, sunlight-readable colour display.

The instrument uses a 66 mm (2.6 in) 320 × 240 IPS LCD with wide viewing angle and adjustable LED backlighting. A rotary control and two independent buttons provide direct menu navigation and operating control.

  • Manufacturer part number: BLAZE-EMS-2
  • Also identified as: EMS-2
  • Standard 80 mm (3 1/8 in) aircraft instrument enclosure; suitable for front or rear mounting
  • 66 mm (2.6 in) 320 × 240 sunlight-readable IPS colour display
  • 8–30 V DC supply input range
  • Built-in alarm output and RS232 serial output
  • Up to four thermocouple channels using the instrument’s internal electronics
  • Supports up to 12 thermocouple channels when used with an optional MGL RDAC remote data-acquisition unit via CAN bus
  • Field-upgradeable firmware via the RS232 connection

The EMS-2 display automatically arranges enabled engine parameters to make effective use of the screen area. Configuration, sensor selection and installation requirements should be verified against the applicable aircraft and engine documentation before installation.

Documentation: MGL Avionics Blaze EMS-2 Operating Manual

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.