Skip to Content
  1. All Products
  2. All Products
  3. Whelen OR36R1N Red LED Beacon 14VDC 2.6 Upper
Select currency EUR
Whelen OR36R1N Red LED Beacon 14VDC 2.6 Upper

Whelen OR36R1N Red LED Beacon 14VDC 2.6 Upper

https://www.roctexo.com/web/image/product.template/9267/image_1920?unique=224f3b1
Part numbers : RX1-11-16637 , 01-0772010-50 , 11-16637
Unit of Measure: EA

627.78 EUR / EA 627.78 EUR 627.78 € excl. VAT

627.78 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 35 EA ready to ship on Monday 2026-08-17
Order before 17:00 CET Tomorrow
Up to 59 EA ready to ship on Thursday 2026-08-20
Order before 17:00 CET Tomorrow
63 EA available on request, fees apply
Special order from vendor stock.

The Whelen OR36R1N is an Orion 360 red LED anti-collision beacon for 14 VDC aircraft electrical systems. This upper-installation assembly has a 66 mm base and is identified by manufacturer part number 01-0772010-50.

Whelen describes the Orion 360 range as a low-profile LED beacon series intended as an update for legacy round beacon installations. Confirm mounting arrangement, electrical connection and airworthiness suitability for the individual aircraft before installation.

  • Model: OR36R1N
  • Manufacturer: Whelen Aerospace Technologies
  • Manufacturer part number: 01-0772010-50
  • Light output: Red LED
  • Nominal operating voltage: 14 VDC
  • Base size: 66 mm (2.6 in)
  • Average input current: 0.53 A
  • Pulse current: 2.8 A
  • Flash rate: 45 ± 4 flashes per minute
  • FAA TSO-C96a Class III approved

Installation and continuing-airworthiness information is available in Whelen’s OR36R1N / OR36S1N Installation Guide (14B91). Installation approval and compliance with applicable airworthiness requirements remain the responsibility of the installer and aircraft operator.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.