Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Appareo Stratus Es Certified Transponder With 3I Kit

https://www.roctexo.com/web/image/product.template/23356/image_1920?unique=d1c889c
Part numbers : RX1-11-16555 , 153010-000039/62 , 11-16555
Unit of Measure: EA

3441.74 EUR / EA 3441.74 EUR 3,441.74 € excl. VAT

3441.74 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 1 EA ready to ship on Thursday 2026-10-01
Order before 16:00 CET on Tuesday 2026-09-29
1 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Appareo Stratus ES, manufacturer part number 153010-000039/62, is a panel-mounted Mode S Extended Squitter (1090ES) transponder with ADS-B Out capability. Designed for installations using an approved external GPS position source, it provides responses to Mode A/C and Mode S interrogations.

This version is supplied with the Stratus 3i kit. The Stratus 3i is a wired ADS-B In receiver that connects to the Stratus ES transponder and uses aircraft power and the transponder’s externally mounted antenna signals. The 3i installation documentation lists a receiver, mounting clip, 9-pin D-sub connector and interface cables as supplied components.

  • Manufacturer part number: 153010-000039/62
  • Panel-mounted 1090ES Mode S transponder
  • ADS-B Out capability using an approved external GPS position source
  • Stratus 3i ADS-B In receiver kit
  • Stratus ES is documented as compliant with FAA TSO-C112e and TSO-C166b
  • Stratus 3i is not EASA/FAA approved

Installation, configuration and aircraft eligibility must be determined by appropriately qualified personnel using applicable approval data and current manufacturer documentation.

Documentation: Stratus ES/ESG Installation Instructions and Stratus 3i Installation Guide.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.