Skip to Content
  1. All Products
  2. All Products
  3. TE Soldersleeve With Pre-Installed Lead Cwt-5-W122-5
Select currency EUR
TE Soldersleeve With Pre-Installed Lead Cwt-5-W122-5

Image for illustration only. It may show a product series rather than the exact product offered.

TE Soldersleeve With Pre-Installed Lead Cwt-5-W122-5

https://www.roctexo.com/web/image/product.template/85522/image_1920?unique=83685e0
Part numbers : RX1-11-16370 , CWT-5-W122-5 , 11-16370
Unit of Measure: EA

2.23 EUR / EA 2.23 EUR 2.23 € excl. VAT

2.23 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 159 EA ready to ship on Monday 2026-10-05
Order before 17:00 CET on Friday 2026-10-02
Up to 463 EA ready to ship on Thursday 2026-10-08
Order before 17:00 CET on Friday 2026-10-02
3,120 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The TE Connectivity RAYCHEM CWT-5-W122-5 is a SolderSleeve shield terminator supplied with a pre-installed lead. It provides a compact solder termination solution for shielded cable work, with splash-protection properties and a thermochromic temperature indicator.

The pre-installed lead is white, tin-plated, stranded XL polyethylene wire with a nominal conductor size of 0.38 mm².

  • Manufacturer part number: CWT-5-W122-5
  • Product family: RAYCHEM CWT SolderSleeve shield terminators
  • Pre-installed lead: Yes
  • Expanded inside diameter: 4.32 mm minimum
  • Recovered inside diameter: 2.01 mm maximum
  • Compatible jacket diameter: 4.3 mm
  • Minimum shield outside diameter: 2.0 mm
  • Overall length: 29.3 mm
  • Maximum operating temperature: 125 °C
  • Maximum wire temperature: 105 °C

For installation and design activity, refer to the applicable TE Connectivity product drawing and CWT installation documentation.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.