Skip to Content
  1. All Products
  2. All Products
  3. EarthX Lithium Battery Experimental Aircraft 12V/15.6 AH Case E ETX900-VNT
Select currency EUR
EarthX Lithium Battery Experimental Aircraft 12V/15.6 AH Case E ETX900-VNT

Image for illustration only. It may show a product series rather than the exact product offered.

EarthX Lithium Battery Experimental Aircraft 12V/15.6 AH Case E ETX900-VNT

Factory-direct distributor Roctexo Aerospace is a factory-direct distributor for EarthX, the manufacturer of this product. We welcome requests for any quantity of this product, as well as for other products manufactured by EarthX.
Hazardous product
Hazardous material Special shipping rules and carrier restrictions may apply.
https://www.roctexo.com/web/image/product.template/40643/image_1920?unique=a73d2bf
Part numbers : RX1-11-16211 , ETX900-VNT , 11-16211
Unit of Measure: EA

2014.47 EUR / EA 2014.47 EUR 2,014.47 € excl. VAT

2014.47 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
9 EA available on request, fees apply
Hazardous material special order from vendor stock.

The EarthX ETX900-VNT is a 13.2 V lithium iron phosphate (LiFePO4) aircraft battery for experimental aircraft applications. Built in Case E format, it combines 15.6 Ah capacity with 840 A peak cranking output and 400 CCA.

The VNT version is based on the ETX900 platform and incorporates thermal-runaway containment and a venting arrangement intended by EarthX for in-cabin installations. Its integrated battery management system provides cell balancing and protection against over-discharge, over-charge, short circuit and excessive heat during cranking.

  • Manufacturer part number: ETX900-VNT
  • Nominal voltage: 13.2 V
  • Capacity: 15.6 Ah at 1C rate
  • Peak cranking amps: 840 A
  • Cold cranking amps: 400 A
  • Case size: E
  • Dimensions: 166 x 76 x 168 mm (L x W x H)
  • Weight: 2.4 kg
  • On-battery LED fault indication; provision for connection to a compatible 12 V LED indicator or EFIS, according to the manufacturer documentation
  • Supplied with two M6 screws, two vent-tube elbows and two foam pieces

For experimental aircraft only. Not EASA/FAA approved; this is not a TSO or PMA part number. Installation, vent routing, charging-system settings and indicator wiring should be carried out in accordance with the EarthX documentation.

Documentation: EarthX ETX-Series Lithium Battery User’s Manual.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.