Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Trig TY96A Panel Mount VHF Radio 25 Khz

https://www.roctexo.com/web/image/product.template/73946/image_1920?unique=fe933b5
Part numbers : RX1-11-15376 , 01788-00-01 , 11-15376
Unit of Measure: EA

2190.92 EUR / EA 2190.92 EUR 2,190.92 € excl. VAT

2190.92 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
2 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Trig TY96A is a slimline, panel-mount VHF communications radio for 25 kHz channel-spacing operation. Manufacturer part number: 01788-00-01.

With a 33 mm-high stack format, the TY96A is designed to conserve panel space while providing a clear dual-frequency display and practical communications functions for general aviation use.

  • 25 kHz VHF radio with 760 channels from 118.000 to 136.992 MHz
  • 10 W nominal carrier transmitter power
  • Dual Watch for monitoring two frequencies
  • Push Step tuning selection between 25 kHz and 50 kHz steps
  • ‘Say Again’ replay function for the last received transmission
  • Dedicated emergency-frequency selection for 121.5 MHz
  • Configurable airfield-frequency database for more than 200 frequencies and identifiers, uploaded through the front USB port
  • Built-in two-place stereo intercom and stereo music capability
  • No external cooling fan required
  • ETSO authorised; refer to the applicable installation documentation and aircraft approval basis before installation.

The TY96A is a 25 kHz-only model. Confirm operational suitability for the intended airspace, aircraft installation and associated equipment before purchase or installation.

Manufacturer documentation: Trig TY96A product information and TY96/TY96A installation manual.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.