Skip to Content
  1. All Products
  2. All Products
  3. Single Conductor 1/4 Solder Sleeve With Pigtail
Select currency EUR
Single Conductor 1/4 Solder Sleeve With Pigtail

Image for illustration only. It may show a product series rather than the exact product offered.

Single Conductor 1/4 Solder Sleeve With Pigtail

https://www.roctexo.com/web/image/product.template/107006/image_1920?unique=970ab70
Part numbers : RX1-11-14743 , CWT-7-W122-5 , 11-14743
Unit of Measure: EA

2.93 EUR / EA 2.93 EUR 2.93 € excl. VAT

2.93 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 712 EA ready to ship on Monday 2026-10-05
Order before 17:00 CET on Friday 2026-10-02
Up to 944 EA ready to ship on Thursday 2026-10-08
Order before 17:00 CET on Friday 2026-10-02
1,686 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The TE Connectivity RAYCHEM CWT-7-W122-5 is a SolderSleeve shield terminator with a pre-installed pigtail. This single-conductor, 1/4-inch class sleeve provides a heat-shrinkable solder termination solution for cable-shield grounding applications.

  • Manufacturer part number: CWT-7-W122-5
  • TE Connectivity internal number: 764619-000
  • RAYCHEM CWT SolderSleeve shield terminator with pre-installed green, stranded, tin-plated lead
  • Expanded inside diameter: 6.4 mm; recovered inside diameter: 3.3 mm maximum
  • Overall length: 32.5 mm
  • Specified wire size: 1.5 mm² (16 AWG)
  • Pre-installed lead size: 0.38 mm²
  • Maximum operating temperature: 125 °C; maximum wire temperature: 85 °C
  • Splash-protection resistance property

TE Connectivity lists no government qualification and no MIL/NAS specification for this item. Confirm suitability against the applicable approved maintenance data and installation requirements before use.

Documentation: TE Connectivity dimensional drawing and CWT installation procedure.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.