Skip to Content
  1. All Products
  2. All Products
  3. RAMI AV-586 2 VOR LOC GS Antenna Coupler TSO
Select currency EUR
RAMI AV-586 2 VOR LOC GS Antenna Coupler TSO

RAMI AV-586 2 VOR LOC GS Antenna Coupler TSO

https://www.roctexo.com/web/image/product.template/9207/image_1920?unique=99a391e
Part numbers : RX1-11-14044 , AV-586 , 11-14044
Unit of Measure: EA

211.59 EUR / EA 211.59 EUR 211.59 € excl. VAT

211.59 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 5 EA ready to ship on Monday 2026-08-17
Order before 17:00 CET on Friday 2026-08-14
Up to 9 EA ready to ship on Thursday 2026-08-20
Order before 17:00 CET on Friday 2026-08-14
2 EA available on request, fees apply
Special order from vendor stock.

The RAMI AV-586 is a receive-only navigation antenna coupler designed to split the signal from one VOR/LOC/GS antenna to two navigation-radio inputs. It supports installations where two navigation receivers require VOR, localiser and glideslope signals from a single antenna.

Manufactured under part number AV-586, this compact 50-ohm coupler has one antenna port and two NAV/LOC/GS output ports. All connections use female BNC connectors.

  • Navigation receive application: VOR/LOC/GS
  • One antenna input with two NAV/LOC/GS outputs
  • 50-ohm nominal impedance
  • Frequency range: 108–118 MHz and 328–336 MHz
  • Female BNC connectors
  • Receive-only RF application
  • FAA TSO references: C34e, C36e and C40c

Installation documentation specifies mounting the coupler between the antenna and receivers, with the port identification marked on the unit. As with any TSO article, suitability and approval for installation in a specific aircraft must be determined in accordance with the applicable airworthiness requirements.

Manufacturer product information
Manufacturer installation instructions (PDF)

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.