Skip to Content

Trig TY91 Dual Control VHF Transceiver

https://www.roctexo.com/web/image/product.template/13846/image_1920?unique=de10039
Part numbers : RX1-11-13343 , 01451-00 , 11-13343
Unit of Measure: EA

2223.02 EUR / EA 2223.02 EUR 2,223.02 € excl. VAT

2223.02 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
2 EA available on request, fees apply
Special order from vendor stock.

The Trig TY91 Dual Control VHF Transceiver is a compact certified aircraft communications radio configuration designed around one radio unit and two control heads. Manufacturer part number 01451-00.

The dual-control arrangement allows the TY91 radio to be operated from two cockpit positions, making it suitable where radio access is required from either seat. Its separate controller and radio-unit architecture supports installation where panel space is limited.

  • 8.33 kHz channel-capable VHF communications radio
  • Dual Watch function for monitoring two channels
  • Two-controller configuration for tandem cockpits
  • Push Step frequency-selection function
  • Built-in two-place intercom with headset microphone-gain adjustment
  • External-speaker amplifier and auxiliary input
  • Compatible with selected EFIS and GPS integrations for remote control and frequency transfer, subject to installation configuration
  • Nominal transmitter output: 6 W
  • DC supply range: 11–33 V
  • Published certification: ETSO-2C169a, ETSO-2C128, TSO-C169a and TSO-C128a

The panel controller is published at 74 mm installed depth when fitted with its D-type connector. Refer to the applicable Trig documentation for approved installation, wiring, configuration and operational requirements.

Documentation: Trig TY91/TY92 Compact Radio product information and TY91/TY92 Installation Manual.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.